Gear oil lubricates the internal components of the transmission, keeping everything running smoothly. If the oil levels drop too low, friction and overheating can occur, leading to costly repairs. Always check your gear oil levels regularly to avoid issues. Here’s how to do so:
Prepare your vehicle:
Before you begin checking the automotive gear oil UAE, ensure the vehicle is parked on level ground. This ensures accurate readings of the oil level. If you’re working with a manual transmission, you may need to check the oil while the engine is turned off, but for automatic transmissions, it’s usually recommended to check the oil with the engine running. Always consult the owner’s manual for specific instructions regarding your vehicle.
Locate the dipstick or fill plug:
For manual transmissions, your vehicle will typically have a dipstick that you can remove to check the oil level. On some vehicles, there may be a fill plug located on the side of the transmission. The fill plug is often found underneath the car and may require the use of a jack to elevate the vehicle. For automatic transmissions, the dipstick will usually be located near the engine bay.
Check the oil level:
Once you locate the dipstick or fill plug, remove it carefully. If it’s a dipstick, wipe it clean with a cloth, then reinsert it fully and pull it out again to check the oil level. The dipstick will have markings indicating the minimum and maximum levels. If the oil is below the minimum mark, you’ll need to add more. For vehicles with a fill plug, check the oil level by removing the plug and using your finger to feel if the oil is near the bottom of the hole.
Inspect the oil condition:
When checking your gear oil, also inspect its condition. Fresh gear oil should be clear and have a slightly golden or amber color. If it appears dark, gritty, or smells burnt, it might be time for a change. Using high-quality gear oil helps keep the transmission components lubricated and functioning properly.
Top up or change the oil:
If your gear oil level is low, add the recommended oil type until the proper level is reached. Always use the oil specified in your vehicle’s manual. If the oil needs to be changed, drain the old oil and replace it with fresh oil according to the manufacturer’s guidelines.